Company Profile
       Organizational structure
       Corporate Culture
       Team Style
 
Solutions  
Camera movement configuration program
Time:2012/10/9 11:37:52
The camera movement Configuration program (by the main IC + CCD composed of movement)
The Resolution P system of 1/3Sony level N system
High resolution 3172/2163/4103 +409 K 3172/2163/4103 +408 K
General solution 3142/4103 +405 K 3142/4103 +404 K
Low according 3142/2163/4103 +255 K 3142/2163/4103 +254 K
The high solution low according to the 2163 +255 K
4103 +255 K? 2163 +258 K
1/4Sony general solution (rarely do high resolution) 3142 +227 K 3142 +226 K
1/3Sharp
High resolution (few do) 38603 +2361 K 38603 +2361 K
General solution 38603 +2321 K 38603 +2311 K
1/4Sarp general solution 38603 +2421 K 38603 +2411 K
Color Camera
SONY these master IC: SS-1 (2163), SS-11 (3141/2), SS-11X (4103), of SS-HQ1 in (3172), SS-2,
And CCD: 409/408/405/404/255/254/259/258/227/226.
Sharp D4 (38603), D5 (38627), while the CCD: 2361/2321/2311/2421/2411
Sony black-and-white main IC: 2463 + CCD 255/254/259/258 above
Which is generally in the production of a combination Note: This configuration can be applied flexibly.
SONY low resolution CCD: can be equipped with SONY SS-11 (3142), the SS-1 (2163 rarely), the the SS 11X (4103), NEXTCHIP, HITACHI, A-NOVA
SONY high resolution CCD: can be equipped with SONY SS-1 (2163) in the HQ1 in the (3172), SS-11X (4103), NEXTCHIP, HITACHI, A-NOVA
SHARP level of solution: can be equipped with SHARP D4 (38603), HITACHI, NEXTCHIP, A-NOVA
Korean movement
2010 +405 SK43 without menu
2010 +409 SK43H without menu
2020 +405 SK43M with menu
2020 +409 SK43MH with menu

YH-220X movement configuration program: CXD3117AR (SONY) (this machine is the the Korean GP production house production)
CPU: CXD3117AR (SONY)
Output: MM1024A CNB918
Processing: D2485AR D2310AR (SONY)
Zoom: CXP 84643 (SONY) power: 9743A
-------------------------------------------------- -----------------------------------------------
The first CCD looks: if * machine, open the dust cover, look at the CCD surface

Up and down the two rows of contacts, the middle is missing a big front teeth SONY CCD characteristics

No missing front teeth, SHARP CCD same no missing front teeth, but the thicker lines, Panasonic CCD.
Talk more about the program, most people think SONY, SHARP, Panasonic program? Fact, inside there is mystery:
Theoretically, any CCD can be used with any of the DSP, the current CCD:
SONY (high and low solution),
SHARP (high and low solution)
Panasonic (the level of solution)
Korea A1 + (low resolution),
Samsung (low resolution, had been discontinued, I heard a comeback),
Package known as Matsushita chip as well as in Korea, a total of more than six kinds of brands.
And D.S.P more:
SONY there SS-1 (2163), SS-11 (3141/2), SS-11X (4103), SS-HQ1 (3172), SS-2,
SONY SS-1M DSP CXD2163SONY SS-11 DSP CXD3142, CXD3141SONY SS-HQ1 DSP for CXD3172SONY SS-11X DSP CXD4103
Sharp D4 (38603), D5 fast out
Panasonic D5 main
There are Hitachi (Taiwanese manufacturers),
Korea NEXTCHIP,
Taiwan A-NOVA
And basically not this range
Which are generally in the production of the composition,
SONY low resolution CCD: can be equipped with SONY SS-11 (3142), the SS-1 (2163 rarely), the the SS 11X (4103), NEXTCHIP, HITACHI, A-NOVA
SONY high resolution CCD: can be equipped with SONY SS-1 (2163) in the HQ1 in the (3172), SS-11X (4103), NEXTCHIP, HITACHI, A-NOVA
SHARP level of solution: with SHARP D4 (38603), HITACHI, NEXTCHIP, A-NOVA?
Level of Panasonic Solution: with Panasonic D5 main
A1 + the low solutions: with SONY SS-11 (Hunchong SONY sold)
The Samsung low resolution: (formerly SONY CCD out the most commonly used mixed with SONY SS-11)
SONY machine dumbfounded it! So not to say that is not a Sony CCD will be able to report on the matter, and a variety of mix really just a different cost and the quality of it? Relies entirely on the skill, likened to do good SHARP machine quality is absolutely poor Fortunately also cheaper.
These are just the basics, can not buy a good machine? Oh! Basically look at your good fortune!
May later 639/643 CCD instead of 409/405
Note: YH-W270/YH-270 are SONY movement configuration (domestic self-assembly production)



Camera CCD chip and DSP type (reprint)

On camera resolution,
The resolution is defined on the basis of the image pixel, as follows:
1) image pixels around 250,000 pixels (pixel) color resolution of 330 lines, the black-and-white resolution of about 400 lines of low-grade type.
2) image pixels around 25-38 million pixels, the color resolution of 420 lines, black-and-white resolution of about 500 lines of mid-range type.
3) image pixels around 250,000 pixels, the color resolution of 480 lines, black and white resolution of about 600 lines of high-end type.
The camera parameters marked more and more mysterious and paste, decided to explore whether:
CCD structure of three layers, the first layer is a "mini-lens", the second layer is a dichroic filter "and the third layer of the photosensitive layer.
Super HAD CCD the Chinese Super HAD CCD sensor, condenser lens, than ordinary CCD effect is much improved.
Sony Super Had Ⅱ CCD sensitivity 136% increase, while lower noise. Used for Illumination bolt.
CCD name CCD Model CCD size CCD sensitivity
Super HAD II ICX639AK 1/3 "2250
Super HAD ICX409AK 1/3 "950
Exview ICX259AK 1/3 "1100
Super HAD CCD is the brand up to the CCD: 633,639,405,409
DSP: 3172 3142 4103 Hitachi 93118
EXview 255 259
EX-View: Sony's research and development to improve the technology used to improve the sensitivity of the CCD sensitivity, two visible factors, four times the wavelength of near-infrared waves.
Vertical double-density interline CCD 213AK
CCD + DSP chip identification method:
The 3142 +405 420TVL affordable
Just out of 3142 +633 420TVL CCD manufacturers is relatively small, low illumination, but cast serious (I've seen)
The 2163 +405 480TVL (the so-called false high line) cost-effective, low illumination packaging suitable for infrared machine
2163 +409 480TVL high illumination is not suitable for infrared machine, suitable for ordinary bolt hemisphere
The 4103 +405 480TVL (the so-called false high line) cost-effective, low illumination packaging suitable for infrared machine
4103 +409 480TVL (legend 520TVL) high illumination is not suitable for infrared machines, the general effect
4103 +639 480TVL (legend 540TVL) illumination can also be suitable for mounted infrared machine.
3172 +639 480TVL (legend 540TVL)
The 2163 +255 420TVL low line low according to the less do not comment
Low according to the 2163 +529 480TVL high line, with a small number do not comment
633 is the future instead of 405, his sensitivity than 405 high on a lot, if the technology is in place to do it illumination is very low, installed infrared effect good
639 is the future instead of 409. Sensitivity significantly higher than the 409, if the technology is in place, will make up for poor line infrared effect on the market this defect.
In the same parameters, feeling 3172 +409 during the day and the color is a little more colorful. The 3172 +639 daytime color a bit biased Lan. 3172 +409 at night when no infrared lights, the noise. 3172 +639 no infrared lamp at night, the noise is relatively small, a little better than the illumination of 3172 +409.
639 and 409 main difference is that the 639 sensitivity increased (approximately equal to the previous 405), and the rest of the 639 with the 409. The problem is that: 1. Sensitivity increased under low illumination conditions, the effect is much better than 409, which is better night vision effect. But the sensitivity improved, equivalent into the light becomes large, and in the case does not change the parameters, the color fades. Front end sinking, 3796 (CDS / AGC, instead of 2096), if only with the 2096 parameters, the effect is not so good, if 639 to replace 409, illuminance changed for the better, but dsp parameters may modify even the color matrix operation had to adjust to 409 color effect, not to replace the CCD on the line. Regardless ride 3172 or 4103. In addition, 633 instead of 405, the situation is even more serious, 633 in fact, little good sensitivity, night vision effect is very good, but easily overexposed in the sun, fade more serious ride 3142 Fengyun originally not a good DSP want to do a good job is difficult, plus the past few years are in a price war, parts try to save a high general board Noise, catch the 633 high sensitivity CCD, the signal-to-noise problem is more serious. 633 If you take 3172 or 4103, then, like to engage in more than just the cost becomes high, and can only be sold when false high line. 632 (N system), even worse, more serious color roll no solution unless the added power sync, but few people can accept the price I really do not know how to think Sony is probably for the next new DSP to prepare for it.
4103 instead of 2163 DSP do not know why, SONY proceeded to launch the 3172, 3172 to do it is not ideal.
The 3172 program effects is indeed better than the 4103, but the chip temperature is relatively high, the highest reached nearly 70 degrees when done or can do, first, to do the double plate Second, the high efficiency of power use, heat a small. Third, it is best to add the heatsink Another approach 3172 3.3V above 2.9V-3.0V for
639CCD DSP available Hitachi 93118, be better than 3172
Infrared one consideration:
1, using state-of-the-art program: 3142 +633 420 lines generally used program, commonly used 4103 +639 480 line program, more than 500 lines of 3172 +639 scheme. 2, stable LED infrared lights: infrared series is Taiwan Dingyuan LED infrared lights, its long life, power and stability, good heat dissipation, the infrared emission uniformity, is not easy because the current moment is too large and burned. And "dual-lamp technology with wide-angle and narrow-angle infrared lights, and solve the complementary effect of the angle and distance of the infrared lamp. 3, using a dedicated IR lens: the infrared machine because of its accept infrared reflection principle imaging at night, so dedicated IR lens more favorable accept infrared, which better night imaging. Companies to use the IR lens defocusing lens are imported from Korea. 4, using dual filter switch: infrared color to black to accept infrared imaging camera to achieve night, need a specially designed filter, if you share the same filter, then daytime imaging ineffective, likely to cause the color cast ICR can be a good solution to this problem. 5 using Shuangbo Design: using Shuangbo design can effectively avoid reflective, so the camera better.
Actual evaluation and testing:
In 3142 +633 BK: night vision effect can also:
In 3172 +639 BK: I heard that night vision effect:
Line of high / low line, IC and current relationship:


Line the number IC and CCD match current 420TVL 3141 (1267,2096) + 405 120MA450TVL 2163 (2006,2480) + 405 120MA480TVL 2163 (2006,2480) + 409 170MA450TVL 2163 (2006,2480) + 255 170MA (low-light) 480TVL 2163 (2006,2480) + 259 170MA (high-line low-light) line 420 (405 +3142 +2096) 480 lines (409 +2163 +2480 +2006) 520 lines (409 +3172 +2096) 1/3 "SONY420 line color video camera D3141 +405 AK1 / 3 "color camera SONY460 line D2163 +405 AK1 / 3" SONY480 line color camera D2163 +409 AK1 / 3 "SONY480 line color camera D2163 +408 AK1 / 3" SONY535 line color camera like machine D3172 +409 AK 1/4 "SONY420 line color hemisphere D3141 +227 AK1 / 3" SONY420 line color hemisphere D3141 +405 AK1 / 3 "SONY460 line color hemisphere D2163 +405 AK1 / 3" color hemisphere SONY480 line D2163 +409 AK1 / 3 "SONY600 line of black-and-white hemisphere D2463 +409 AL 1/4 "SONY420 line color to black and white camera (software turn) D3141 +227 AK1 / 3" SONY420 line color to black-and-white camera (software turn) D3141 +405 AK1 / 3 "SONY460 line color to black-and-white video camera (software rpm) D2163 +405 AK1 / 3 "SONY480 line color to black and white video camera (software turn) D2163 +409 AK1 / 3" SONY480 line color to black and white camera N system (software turn) D2163 +408 AK1 / 3 "SONY535 line color to black and white camera N system (software turn) D3172 +408 AK 1/4" SONY420 line color to black and white hemisphere (software turn) D3141 +227 AK1 / 3 "SONY420 line color to black and white hemisphere (software turn) D3141 +405 AK1 / 3 "SONY460 line color to black and white hemisphere software turn the D2163 +405 AK1 / 3" SONY480 line color to black and white hemisphere (software turn) D2163 +409 AK1 / 3 "SONY535 line color to black and white hemisphere (software turn) D3172 +409 AK1 / 3 "color low-light camera SONY420 line D3141 +255 AK1 / 3" SONY460 line color low light camera D2163 +255 AK1 / 3 "color low light camera SONY480 line D2163 +259 AK1 / 3" SONY520 line color low light the camera D3172 +259 AK1 / 2 "SONY535 line color camera D3172 +259 AK
 
 
    Copyright:SHENZHEN WONDERHOW Electronics Co., Ltd. Address:Futian District, Shenzhen New Asia Guoli Building, Room 2823 Zhen Road   粤ICP备12076585号 Site construction:HeYouE-mail
Miss Zeng Sales Manager
Miss Zhu Sales Engineer
Miss Tan Sales Engineer